Home > USB AUDIO > Musiland releases 32bit/384KHz drivers

Musiland releases 32bit/384KHz drivers

July 28, 2011 Leave a comment Go to comments

http://soomal.com/doc/10100002225.htm

Driver version 2.0.0.0 supports all Musiland Monitor devices up to 192KHz and on the new Monitor 03 up to 384KHz. It is a major BETA release. The company is encouraging trial and seeking feedback

Other enhancements:

  • MU-BASS (BASS equalizer/enhancer) upgraded to MU-DSP allowing the selection of the  center frequency for 5 bands from 20 Hz to 20 KHz. This feature is available for the entire Musiland Monitor family
  • “The objective of this new drive is to enhance the sound quality. The new algorithm reduces the jitter with optimized timing”
  • Sound card volume control is independent from system volume control

More in the USB tab

  1. Justin
    July 28, 2011 at 21:10
    Reply

    Thanks for this info… my Musiland 03 arrives today. And within a week, the BIII will ship to me! I am on my way…

    Quick question, I tried to find the max number of channels the Musiland 03 can output… is it only two channels? Would I need this (http://exadevices.com/exaU2I/Features.aspx) to do 8 channels output to the BIII?

  2. BlogGeanDo
    July 29, 2011 at 16:05
    Reply

    Yes, the Musiland is only a 2-channel device. The exa supports 8 channel, but I don’t know much about it. Do you plan to use the BIII in 8-channel configuration?

    • Justin
      July 29, 2011 at 16:40
      Reply

      I would like to leave that option open, if possible. Then, when the time is right buy a few extra IVY III linestages… have 8-channel balanced output. I frequently do work with 8-channel sound.

  3. terry
    August 28, 2011 at 07:07
    Reply

    There is a newer beta available now but I have been unable to get drivers after 1.0.12 to work with my 02 US – says ‘license invalid’
    When I try to re-do the MICyMon process with my license key it reports ‘Device not found!’

    • BlogGeanDo
      August 28, 2011 at 15:21
      Reply

      The second beta for v2.0.0.0 does not work for me (I get license invalid no matter what I try). The first beta works.
      I have used 1.0.13 and it works well in the 01 MINI. 1.0.14 is for the 03 US. I think if you can use 1..0.12, you should be able to use the first beta of 2.0.0.0
      Hope this helps…

  4. terry
    August 30, 2011 at 09:31
    Reply

    yes it helped 🙂 thanks a lot! now I am looking forward to an mac osx driver…

  5. Suanne Romaniello
    September 14, 2016 at 15:19
    Reply

    more info here

  6. Jesse Lafreniere
    September 14, 2016 at 17:00
    Reply

    Nikon D3200 Lowest price

  1. No trackbacks yet.

Leave a comment