Home > Arduino, Code, DIY HiFi > More HIFIDUINO…in SERBIA

More HIFIDUINO…in SERBIA

August 26, 2011 Leave a comment Go to comments

I found these photos while perusing the web (I think they are  from Serbia…)

The gray LCD is very good looking on the brushed aluminum case (superb workmanship I might say…)

I got more photos form the builder of this work of art… Better looking than most commercial implementations BRAVO!

  1. Sync
    August 26, 2011 at 14:13
    Reply

    Work of my hands…
    LCD has white backlight. 😉

    http://s1239.photobucket.com/albums/ff516/Freakfusion/

    • BlogGeanDo
      August 26, 2011 at 15:36
      Reply

      WOW! That is some skill. Congratulations! I think I might borrow more of your pictures and post them here 🙂

  2. Sync
    August 26, 2011 at 15:42
    Reply

    Feel free to do that… 😉

  3. Sleepy
    August 26, 2011 at 19:24
    Reply

    Did you make the case? What about the knobs? Very nice.

  4. Sync
    August 26, 2011 at 22:30
    Reply

    Thanks guys!
    Case and knobs are custom made on my spec…

  5. Chang LH
    August 26, 2011 at 22:54
    Reply

    The case is so well made with a high end finish! Must have been machined from thick aluminium plates.

  6. Sync
    August 26, 2011 at 23:00
    Reply

    Yes…front and sides are from 10mm trick alu…top and bottom are 3mm alu…rear is 5mm alu.

    • BlogGeanDo
      August 28, 2011 at 15:22
      Reply

      If you don’t mind sharing, How much did it cost?

      • Sync
        August 28, 2011 at 18:16

        Case (CNC milling), knobs and feet’s came about 120 EU..

  7. Anonymous
    August 27, 2011 at 12:53
    Reply

    Nice job…where did you find LCD with white backlight?

  8. Sync
    August 27, 2011 at 18:27
    Reply
  9. Sync
    August 27, 2011 at 18:28
    Reply
  10. Igor Jurić
    September 9, 2011 at 19:50
    Reply

    Sync, where did you made this case? As it’s really cheap to get such quality product for 120EUR.

  11. Pepe
    September 28, 2011 at 18:54
    Reply

    yes please Sync, where did you get that case made ?. I falled in love with the finishing.

    cheers
    Pepe

  12. Sync
    October 8, 2011 at 18:47
    Reply

    Sorry guys…case is made here on different places…I made drawings, second guy did machining, third anodising…

    • Igor Jurić
      October 8, 2011 at 20:26
      Reply

      Can you maybe show/post drawings? Or even send them on email?

  13. Pepe
    October 16, 2011 at 10:14
    Reply

    Sync, what material is the top cover ? … it just amaze me every time I see your pictures. You should consider seriously on selling these ones !!

    cheers
    Pepe

  14. Pepe
    October 16, 2011 at 10:16
    Reply

    I second Igor´s petition …. if you post the drawings there is a chance to have them made in places like frontpanelexpress or something like that.

  15. Sync
    October 30, 2011 at 18:21
    Reply

    Sorry guys…it has to be unique one 😉
    Beside that…shipping from Serbia can be far too expensive. So I assume that price will be about 250eu at your doors.

  16. zoka959
    January 19, 2013 at 04:19
    Reply

    Hello Sync,
    I am from Serbia also and very interested in using Arduino to control my double ACKO DAC
    AKD16 (Sabre 9016 chip).Are you willing to give mi some guidance to set the Arduino for that purpose , off course money option is no problem.
    Svako dobro
    Zoran

  17. Faith Roseboom
    September 14, 2016 at 17:03
    Reply

    magazin online

  18. Sylvester Yacoub
    September 14, 2016 at 17:14
    Reply

    child porn

  19. Maragaret Cerone
    September 14, 2016 at 18:10
    Reply

    assfucking comcom

  20. Lou Eichert
    September 14, 2016 at 18:16
    Reply

    lovelady rehab birmingham al

  21. Emerson Everhart
    September 14, 2016 at 18:21
    Reply

    buy a tv online

  22. Gaston Fouty
    September 14, 2016 at 18:50
    Reply

    okcu homes

  1. No trackbacks yet.

Leave a reply to Igor Jurić Cancel reply