Home > General > More Improvements…

More Improvements…

  • Arbitrary number of named inputs
  • All settings can be customized per input
  • All settings are saved in EEPROM and last setting remembered after a power cycle
  • “Soft mute” control from the console and from the remote control
  • Check the CODE tab
  1. Chang LH
    June 22, 2011 at 12:59

    Good Work, many thanks for the ever improving features/functions – such wonderful service to the DIYers.

    I uploaded this version b9.0 and as usual change the codes for the Apple remote functions for Volume Up and Down (from Case 11 to 10 and 13 to 12 respectively). Everything works well except for the Center button – Mute. So, I changed the code for center button from “Case 4” to “Case 5” and the Center button now mutes(-70dB) or ramps up to the original volume beautifully. Thanks again.

  2. Chang LH
    June 22, 2011 at 13:09

    Ok, there’s a small problem here. The muting and ramping up works for all volume settings up to -1dB, but if the volume is set at 0dB, muting (-70dB) works but on pressing the button again, the volume would ramp past 0dB and continue in an endless loop, displaying unknown characters on the LCD. I did this check without the dac on, so I didn’t know if the actual volume (sound) is going up and down or not. All controls would not respond and the only way to get out of the loop is to power down. Thanks

    • BlogGeanDo
      June 22, 2011 at 15:13

      Hi Chang LH,

      Thanks for testing my code! I’ve uploaded the fixed version. It was a bug that allowed the volume to go past zero.

  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s